EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is really a remarkably economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and program security for a wide array of photovoltaic (PV) purposes.
Vital Options from the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar energy harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with real-time information monitoring.
Numerous Load Manage Modes such as manual and timer.
Comprehensive Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally comply with appropriate safety protocols and make sure the process is driven off ahead of connecting parts.
Phase 1: Join the battery terminals to your cost controller (good to favourable, detrimental to damaging).
Step two: Hook up the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Make use of the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild control.
five. Monitoring and Data Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using software package including Photo voltaic Station Personal computer.
Distant monitoring is possible Together with the EPEVER WiFi module.
6. Troubleshooting Common Issues
Situation 1: No Electricity Output
Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: Over-Voltage Defense
Verify the photo voltaic array’s voltage ranking.
Alter system parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses throughout conversion.
Improved Dependability: Stable functionality less than variable masses.
Extended Battery Lifestyle: Regular and exact charging visit here profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology can be an Outstanding option for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guide, consumers can assure maximum efficiency and technique longevity.